10
4. HOW TO USE (4 STEPS)
1. Assemble the two steps in the center as follows: place the legs (J) in its working position (B)
and secure with the allen screws (C) and the butterfly nuts (D).
2. To assemble the lower step: insert the rear legs (T) into their working position and secure
with the allen screws (C) and the butterfly nuts (D). Insert the front legs (Y) into their working
position (K) and secure by passing the screw (L) of the bushing (I), fixing it with the wing
butterfly (Z).
3. To assemble the upper step: insert the front legs (X) into their working position (N) and
secure with the allen screws (C) and the butterfly nuts (D). Insert the rear legs (V) into their
working position and secure by passing the screw (L) of the bushing (I), fixing it with the
wing nut (Z).
4. Unfold the braces (E) and release the special screws (F) the butterfly nuts (G). Place the
special screws (F) into the rail (R) and attach the braces (E) with the special screws (F) and
secure by tightening with the butterfly nuts (G).
5. Order the steps as indicated in the image. To connect one step to another, release the
butterfly screw (S) of the leg-leg joint system. Put the plates (P and Q) asymmetrically on
the legs matching their holes and secure with the butterfly screw (S). They must be placed on
both sides of the stair. Repeat this operation according to the number of steps to be installed.
6. Release the plastic knobs (M) from the bushing (I) and insert the handrails (H) into the
bushing (I). Tighten the plastic knobs (M) once the handrails (H) have been adjusted to the
stairs.
7. For the process of disassembly, reverse the order of the described steps.
ENGLISH