ON/OFF
Screw tight the lamp tail to turn on the lamp, unscrew it to turn off.
Output Selection
To change brightness, switch on the light first. Then switch off and fast on again until you reach
the brightness that is needed. As the brightness cycles through Moonlight
→
High
→
Red
→
Red
Flash
→
Green
→
Green Flash
→
SOS.
The light will not memorize the brightness level, each time it will start at Moonlight output if it is
turned on again after 1 second.
Battery Specifications
Type
Dimensions
Nominal Voltage
Usability
Sanyo Battery (Ni-MH)
AAA
1.2V
Recommended
√√
Pairdeer Battery (Alkaline)
AAA
1.5V
Recommended
√√
Battery Replacement
Unscrew the lamp tail to insert the battery with the anode side (+) toward the lamp's head, screw
the lamp tail back tight.
Note: Pairdeer Alkaline AAA battery is included.
Parts Included
1. CL05 EDC Emergency Lamp 1PCS
