FENIEX
// INSTRUCTION MANUAL
WEB
//
www.feniex.com
6
TM
1.
Place the unit against the
selected mounting surface.
2.
Mark the areas where the
mounting holes will be drilled. If
the mounting surface is part of
the vehicle, make sure no vital
components could be damaged
by the drilling process.
3.
Drill two mounting holes per
bracket in the marked surface.
Use hardware (not provided)
to secure the brackets to the
mounting surface.
MOUNTING INSTRUCTIONS
4.
Use the provided
set screws to firmly
position the brackets
to the pole light.
Screw tightly with a flat-head
screwdriver to ensure the
brackets are tightened securely to
the pole.
Important! Hardware is sold seperately.
3/8”
3/4”
3”
3”
Mark holes
Note! The above Diagram is not to scale.
Set screw
location
