Feniex C-4017, Instruction Manual, Page: 13 / 14

Feniex Industries, Inc.
1.800.615.8350
/ feniex.com
13
1. Setting button as momentary:
Press the “On/Off” button to turn the
system off.
Press and hold the desired button you wish
to program as momentary.
Continue holding the selected button
while holding down the “On” button
for 3 seconds. A beep will sound when
programmed.
The button is now set as a momentary
button. To reverse the function, repeat the
steps above.
2. Setting wig-wag functionality:
Press the “On/Off” button to turn the
system off.
Press and hold buttons 1 and 2
simultaneously.
Continue holding buttons 1 and 2
while holding down the “On” button
for 3 seconds. A beep will sound when
programmed.
You have now enabled button 1 as the “On/
Off” for wig-wag and the button 2 as the
pattern select.
To reverse the functionality, repeat the
steps above.
Programming Buttons for
Full Function and Handheld
Important! Only the buttons highlighted in red
(above) are available to program.
Press and hold the
siren tone button.
While holding the
siren tone button,
cycle through the
tones using the
tone selector switch
(shown right).
Release the siren
tone button.
Tone selector
switch
Important! Only the buttons highlighted in red are
available to program.
2. Setting siren tones as momentary:
Press the “On/Off” button to turn the
system off.
Press and hold the desired button you wish
to program as momentary.
Continue holding the selected button
while holding down the “On” button
for 3 seconds. A beep will sound when
programmed.
The button is now set as a momentary
button. To reverse the function, repeat the
steps above.
1. Setting Typhoon Handheld Siren Tones
1 2 3
4 5 6
1 2
3 4
5 6