SYSTEM SPECIFICATIONS
Input Power
12 - 24 VDC
Current Draw
2.3 Amps
External Fuse (if hard wired)
125% of Circuit Load
Power Output
20 Watts
Colors
Amber, Red, Blue, White, Green
SAE Certification
Class 1, J845
Flash Patterns
20
Dimensions
6.5" D x 4.4" H
FLASH PATTERNS
Single Flash [Slow]
Reverse Simulated Rotating [Slow]
Single Flash [Fast]
Reverse Simulated Rotating [Fast]
Double Flash [Slow]
3x Double Flash [Slow] > 3x Quint Flash [Slow]
Double Flash [Fast]
5x Double Flash [Fast] > 5x Quint Flash [Fast]
Triple Flash [Slow]
6x Sim. Rotating [Slow] > 4x Quint Flash [Slow]
Triple Flash [Fast]
8x Sim. Rotating [Fast] > 6x Quint Flash [Fast]
Quit Flash [Slow]
3x Triple Flash [Slow] > 3x Single Flash [Slow]
Quint Flash [Fast]
5x Triple Flash [Fast] > 5x Single Flash [Fast]
Simulated Rotating [Slow]
Combination #1: Patterns 1, 3, 5, 7, & 9 [Slow]
Simulated Rotation [Fast]
Combination #2: Patterns 2, 4, 6, 8, & 10 [Fast]
SPECIFICATIONS, PATTERNS, & WIRING
COLOR
FUNCTION
CONNECTION
Black
Ground
12v (-)
Chasis Ground
Red
Battery
12v (+)
Positive Battery Terminal
Yellow
Pattern/Sync
12v (+)
Momentary Switch
WIRING DIAGRAM
SYNCHRONIZATION
1)
Tie the yellow wires from each beacon together to
synchronize them. There is no master/slave functionality.
POWER
1)
Simply plug the cigarette lighter adapter into your
vehicle's cigarette lighter outlet and turn on the power
switch to activate the unit.
A)
If hard-wiring the unit, cut cable 4" inches or
more away from the cigarette lighter adapter to
expose the red, yellow, & black wires.
B)
Strip the wire jacketing back to expose the wire.
C)
Extend the red wire to a 12v (+) post. Extend the
black wire to a 12v (-) ground.
The AM600 Beacon is bright & can be harmful to your vision.
Wear protective glasses while looking directly at the product.
PATTERN SELECTION
1)
Momentarily tap the Pattern Changer wire (yellow) to a 12v
(+) positive terminal to change the pattern.
FENIEX
//
2019
// INSTRUCTION MANUAL // v2.2
WEB
//
www.feniex.com
5
TM
