Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
4
REMOTE CONTROL INSTRUCTIONS
POWER
To power the unit, extend the red wire to
a 12v (+) post. Extend the black wire to
the ground post of the vehicle's battery.
AUTO POWER ON
The 4200 Mini can be programmed to
power on automatically when power is
applied to the red wire, or it can remain
off until the power button is pressed. To
toggle this mode:
1. While the unit is powered, but turned
off, press and hold the power button until
a beep is heard.
2. The mode has been toggled. To
change it again, repeat step 1.
BUTTON 1
ON/OFF BUTTON
BUTTON 3
BUTTON 5
BUTTON 2
BUTTON 4
BUTTON 6
MOMENTARY
You can program each of
the 6 outputs to operate as
either latching or momentary
functionality. To toggle this mode:
1. While the unit is powered, but
turned off, press and hold the
button you wish to program.
2. While holding the button from
step 1, press and hold the power
button until a beep is heard.
3. The mode has been toggled. To
change it again, repeat steps 1 & 2.
Black
Ground, 12V-
Red
Positive, 12V+
WIRING DIAGRAM
Green
Button #1, 12V+
White
Button #2, 12V+
Blue
Button #3, 12V+
Yellow
Button #4, 12V+
Brown
Button #5, 12V+
Gray
Button #6, 12V+
