Quick start
1. Insert the batteries and connect the projector’s console.
Click the «6» button to start the connection.
Please make sure that the batteries are inserted correctly and
securely fixed.
If there is an insulating film in the battery compartment,
remove it.
Connecting the projector’s remote control:
Press the «8» and «9» buttons, pointing the remote control
at the laser in the lower right corner of the projector.
A sound signal will indicate a connection of the devices.
Release the button and wait for a while.
The projector’s console is connected successfully
No need to apply additional settings, start using
the remote.
2. Electrofocusing
Press and hold the Menu button (9) on the remote control to switch to the focus settings or
select «Image Settings» in the system settings.
3. Correction of trapezoidal distortion
Fine Tuning
Acknowledgment
Reset
Four-point calibrating mode
Eight-point calibration
mode
The above shows the adjustment range for the eight- and four-point calibration.
Dimensions W (width) and H (height) of the projection image may differ.
For example, the width and height of the 100 ‘’ 16: 9 screen projection is
approximately: W = 2214 mm, H = 1245 mm (the actual screen size has priority).
4. Interface settings
Scan the QR code and install the
mobile application.
Operate the projector remotely using a
smartphone.
Summary of Contents for Wemax One
Page 7: ...Specifications...
