Step 13:
If required- change GUI Password and Submit.
Note:
When setting a new password you must use the
Submit
button.
This password is for access to the GUI only. The LCD front Panel Password will not be changed and is set to prevent
unauthorized users access to your device.
Saving your configuration files
We highly recommend you save your encoder configuration files. Simply Click the “Backup” button
and the config files will be saved to your computer.
To upload a configuration file- simply click
“Choose File”
then locate the file you want to upload.
Click “
Upload
” to install the configuration files. This function is helpful when installing a large number of encoders
in a single system.
EAS
This device is equipped with EAS Terminals/connections and 1 Video/Audio input (DIN Audio / Video Input).
Connect your EAS Alert Device System output to the Encoder using the DIN to breakout cable.
Connect the devices as recommended by your EAS System,
Operation:
If the encoder receives the proper Event signal from your EAS device, the normal input audio/video will replaced by the
audio and video from the EAS system device. Once the encoder has received the proper signal from your EAS device the
normal input video and audio will return to a normal operating mode.
****THIS DEVICE IS NOT AN EAS RECEIVER****
Note: It is the responsibility of the Integrator/System Operator /Installer/User to
properly connect, verify, and test the EAS functionality of this device with the EAS
receiver.
Note: It is the responsibility of the Integrator/System Operator /Installer/User to
properly perform the required EAS tests as required by the FCC or your specific
Government Agency.
If the EAS functions on this device fail for any reason it is the responsibility of the
Integrator/System Operator /Installer/User to replace this device as required by the
FCC or your specific Government Agency.
HDGT-8804 Manual V1.0
14
DECLARATION OF CONFORMITY
Hereby, KOSMOSAT SA confirms that the products HDGT-8804 (HD Digital Encoder / Modulator)
conform to relevant EEC harmonized standards and consequently can carry CE-mark.
Relevant harmonized standards:
EN 55013:2001+A1:2003+A2:2006 Class B
EN 55020:2007+A11:2011
EN 60065:2002
