background image

1.6.5.4  How to recognize an engine with hydraulic lash adjusters
IMPORTANT: 

Do not adjust the valves of an

engine, which has hydraulic lash adjusters!

An engine with hydraulic lash adjusters has a

cylinder block, which has drillings for oil ways for

each hydraulic lash adjuster. If the cylinder block

has oil ways, there are screw plugs on the oil

ways in the cylinder block.
The screw plugs are in the same locations, where

the hydraulic lash adjusters or valve tappets are.

For example, one location is above the engine

plate.

(1)

Screw plug 

NOTE: 

The same cylinder block is used in some

engines, which do not have the hydraulic lash

adjusters.

11

GUID-D19C4F02-BB60-4F75-A73E-9224770F6F33-low.svg [Low]

Fig. 24  

Procedure

1.

Examine the cylinder block for screw plugs on oil ways.

Result

If the cylinder block has no screw plugs, the engine does not have hydraulic lash adjusters.

2.

If the cylinder block has screw plugs, examine the screw head of the screw plug.

Result

If the screw head of the screw plug has two levels, the engine does not have hydraulic lash

adjusters.

GUID-6175EAB7-8664-4EDD-ADDC-86B358C52959-low.svg [Low]

Fig. 25  The screw head has two levels.

If the screw head of the screw plug is flat, the engine has hydraulic lash adjusters.

GUID-B2487765-E008-4158-878E-4F4B2A4F25F7-low.svg [Low]

Fig. 26  The screw head is flat.

1.6.6  Change fuel filters

Absolute cleanliness is required when servicing fuel system.

NOTE: 

Pre-filter and main-filter elements are delivered as a filter set. Single filter elements are not

available as spare parts. Set includes pre-filter water detector gasket and a disposable fuel filter wrench.

GUID-83FFFD66-C378-4F12-BBB7-6A1055F7CD94 [V2]

GUID-D15E8AA3-7AF9-46A8-B256-177610E6E188 [V4.1.2]

1. General

1-32

Rubber Track Tractor

79037272A

Summary of Contents for Vario MT 938




















































Reviews: