![background image](http://html1.mh-extra.com/html/fendt/ideal-series/ideal-series_owners-manual_4034344016.webp)
1.5.14 Procedure if the machine touches a high-voltage source
You must keep the machine away from
overhead power cables.
If the machine and electrical cables touch, do this
procedure:
• Disengage all the drive components.
• Stop the engine.
• Apply the parking brake.
• Make sure that you can exit the operator seat
safely and do not touch the electrical cables.
• Jump from the last step, make sure that there
is no contact between your body, ground and
machine.
• Do not touch the machine until the electrical
power is set to OFF.
• Tell personnel not to touch the machine.
• Tell the applicable local authorities to disengage
the power.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 13
1.5.15 Drive the machine on the road
• Before you drive, make sure that you know the
road specifications of the machine for the:
- Speed
- Brakes
- Steering
- Weight.
• Do not engage the neutral position when the
machine goes down a slope.
• Obey local laws and the machine specifications
with the speed limit.
• Know and obey all local laws that refer to this
machine on the road.
• Make sure that you set all the applicable lamps
to ON when you drive the machine. Refer to
local laws if it is necessary.
• Make sure that all the lamps and reflectors are
in the correct operation. Repair, clean or replace
if it is necessary.
• Select transport mode on the controls.
• Do not drive the machine on the road with the
header attached.
- Only drive the machine with a flip up header
if this is approved by local laws. If it is
approved, do not drive the machine at more
than 30km/h.
• Make sure that the machine's dimensions are
not more than the road limits for weight,
height, length and width.
• Look for electrical cables over the road. Change
the direction of the machine so that it does not
touch electrical cables.
GUID-657D3002-48DB-436B-9B56-D3750095397D-high.jpg [High]
Fig. 14
GUID-37F2AAFC-7DFC-42FC-82F8-48D9CD0435FE [V1]
GUID-D8FDC0CD-25E3-4B18-924F-D897E910929E [V2]
1. Safety
IDEAL Series Combine
31
ACX2738370