FENDT Bianco Series Manual Download Page 87

Page: 87 / 118

09-5

9.3 Hot-air heating

Heating element S 5002 and
S 3002

(model/series-specific)

S 5002

S 3002

- S 3002 P

Place of installation:

In the clothes cupboard or chest of drawers.

Before first use:

•

Several air outlet nozzles have been built into

the camper. Pipes lead the hot air to the air
outlet nozzles. Turn the nozzles so that the
hot air is expelled where you want it.

• Check whether the flue is unobstructed. Any

covers must always be removed.

•

Before the first ignition, ensure that the bat

teries in the automatic ignitor are working
properly (not for S 3001 P).

Operation:

•

Open the bottle valve and the quick-close

valve in the gas line.

•

Turn the operation handle

to the thermo-

stat position 1-10.

•

Press the operation handle

down until it

locks. The ignition is automatic from this posi-

tion, until the flame burns. The ignition spark

is audible. The control light on the automatic
ignitor

blinks during ignition.

•

Hold the operation handle in for up to 10 sec-

onds, so that the ignition fuse kicks in.

•

If the gas line is filled with air, it can take up to

a minute until the gas is ready to burn. Hold
the operation lever

in during this period,

until the flame burns.

Heating while driving is forbidden.

(Pictures may vary somewhat from the equip-
ment on your camper!)

Never re-ignite before two minutes
have passed. Otherwise, there is a

danger of deflagration! This also ap

plies when the flame on an already

operational heating element extin-
guishes and is re-ignited.

Summary of Contents for Bianco Series























































































































Search results

Summary of Contents for Bianco Series

Reviews:

Related manuals for Bianco Series

Brands by name

Popular brands

FENDT Bianco Series, Manual

Search results

Summary of Contents for Bianco Series

Reviews:

Related manuals for Bianco Series

Brands by name

Popular brands