5
How to Connect
To prevent malfunction and equipment failure, always turn down the volume, and turn off all the
units before making any connections.
Once everything is properly connected, be sure to follow the procedure below to turn on their
power. If you turn on equipment in the wrong order, you risk causing malfunction or equipment
failure.
1.
Make sure that the power to the GK-compatible device (such as Roland GR-55)
being connected is turned off, then connect the device to the
GC-1 GK-Ready
Stratocaster®
GK connector using the GK cable .
GK-compatible device (such as Roland GR-55)
GK IN connector
GK connector
Connect the
GC-1 GK-Ready
Stratocaster®
only with dedicated
GK cable (supplied with Roland
GK-compatible devices and
optional GK cables sold by Roland).
Use of any other cable may result
in damage or malfunction.
GC-1 GK-Ready
Stratocaster®
The GK cable is a locking cable. When
disconnecting the cable, do not pull on it
with undue force, but instead release the
lock and gently disconnect the cable. You
can disconnect the cable simply and easily
by holding down the locking portion with
your thumb and gently pulling on the plug.
2.
Turn on the power to the connected GK-compatible device .
Now, when you play your guitar you’ll hear the sound of the connected GK-compatible device.
* Before turning the unit on/off, always be sure to turn the volume down. Even with the volume
turned down, you might hear some sound when switching the unit on/off. However, this is
normal and does not indicate a malfunction.
When using the GC-1 GK-Ready Stratocaster® as a conventional guitar
When using the
GC-1 GK-Ready Stratocaster®
as a
conventional guitar, connect this guitar jack to your amp.
