2
SUPER-SONIC™22
(This is the model name for warranty claims)
FEBRUARY 2010
IMPORTANT NOTICE
•
Copyright © 2010 FMIC. All rights reserved. All
information contained herein is CONFIDENTIAL
and PROPRIETARY and is the property of Fender
Musical Instruments Corporation. It is not to be
sold or assigned to another party and is disclosed
solely for use by Fender® Authorized Service
Centers for purposes of product service and main-
tenance. All information is not to be disclosed to
others without the expressed permission of
Fender Musical Instruments Corporation. All
specifications are subject to change without no-
tice. This information and any copies produced
electronically or otherwise must be surrendered
upon demand of Fender Musical Instruments Cor-
poration.
•
Parts marked with two asterisks (
**
) indicate the
required use of that specific part. This is neces-
sary for RELIABILITY and SAFETY requirements.
DO NOT USE A SUBSTITUTE!
PARTS LIST CODES
The description codes used in the itemized Parts Lists are defined below:
CAPACITOR CODES
CAP AE
= Aluminum Electrolytic
CAP CA
= Ceramic Axial
CAP CD
= Ceramic Disk
CAP CR
= Ceramic Radial
CAP MPF = Metalized Polyester Film
CAP MY
= Mylar
CAP PFF = Polyester Film/Foil
RESISTOR CODES
RES CC
= Carbon Comp
RES CF
= Carbon Film
ATTENTION:
WARRANTY SERVICE PROCEDURES
The Super-Sonic 22 Amplifier is considered to be field serviceable to the component level. As
such stuffed PCB Assemblies are not readily available for this unit. Any Fender Authorized
Service Center in need of a warranty replacement PCB Assembly for this unit should contact
FMIC Tech Support by phone at (866) 345-3642, or by email sent to: [email protected].
