Fender SQUIER SERIES Troubleshooting Manual Download Page 4

3. Have you checked the tuner battery to make sure 

it still carries a charge?

4. Is the power clip attached properly to the battery?

Try using a different cable or replace the battery. If the

instrument and tuner are connected correctly with a good

cable and a fresh battery, and there is still no input to the

tuner, return the product to your Dealer for assistance.

The strings seem either too high off of the fingerboard, 

or too close to it.

For either condition, review the Setup Guide for information on

adjusting the neck of your instrument. Perform either a 

truss rod adjustment or saddle height adjustment if necessary.

If you are not comfortable performing any of these

adjustments to your instrument, take it to an Authorized

Fender

®

Service Center for a “setup.”

NOTE:

Setups and adjustments are considered to be routine

maintenance, and as such, are not covered under warranty.

Broken String.

Visit your local Fender Dealer to purchase replacement strings.

If you need detailed information or assistance with restringing

your guitar, ask your Dealer or visit the Setup page of our 

Mr. Gearhead product support website at www.mrgearhead.com.

Summary of Contents for SQUIER SERIES













Reviews: