Fender Smolder Acoustic Overdrive User Manual Download Page 6

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA, USA

Fender® is a registered trademark of FMIC.

Copyright © 2019 FMIC. All rights reserved. 

P/N 7717101000 - REV 1

Important Safety Instructions

•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC 
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
• WARNING: The unit must only be connected to a safety agency certified, regulated, 
power source (adapter), approved for use and compliant with applicable local and 
national regulatory safety requirements.
• Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth 
for cleaning and then wait until the unit is completely dry before reconnecting it to power.
• Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable 
of producing very high sound pressure levels which may cause temporary or permanent 
hearing damage. Use care when setting and adjusting volume levels during use.

Additional Languages

Manual available in additional languages at:

www.fender.com/support

 Product specifications subject to change without notice

Specifications

IMPEDANCES:

POWER SUPPLY:

POWER REQUIREMENTS:

DIMENSIONS:

WEIGHT:

INPUT: 500kΩ 

OUTPUT: 470Ω

9VDC regulated adapter, 
5.5 x 2.1 mm barrel connector, center negative
105mA @ 9VDC

3.75” x 4.9” x 2.5” (95.25mm x 124.5mm x 63.5mm)
1.2lbs (.54kg)

Summary of Contents for Smolder Acoustic Overdrive









Reviews: