7
A. STEREO INPUT LEVEL -
Adjusts the volume
level of the stereo input channel. Rotating the knob
clockwise increases the stereo input channel’s
contribution to the “Main Out” mix, while rotating it
counterclockwise decreases the volume. Adjust this
control after the Passport’s master output level
volume has been set.
B. EQ LOW
- Adjusts the relative level of the low
frequency content. Rotating the knob
counterclockwise decreases the bass or low
frequency response. Likewise, rotating the knob
clockwise increases the bass or low frequency
response. When the tone controls are set at their
notched or straight up position, the channel
response is “flat” with no frequencies increased or
decreased. For each new mix set-up start with this
control in the notched position.
C. EQ HI
- Adjusts the relative level of the high
frequency content. Rotating the knob
counterclockwise decreases the treble or high
frequency response. Likewise, rotating the knob
clockwise increases the treble or high frequency
response. When the tone controls are set at their
notched or straight up position, the channel
response is “flat” with no frequencies increased or
decreased. For each new mix set-up start with this
control in the notched position.
D. REV/AUX
- Adjusts the amount of signal sent to
the Reverb processor, and to the Rev/Aux output
jack. Reverb can be used to enhance the sound
quality of any performance where appropriate and
desired. In the full left position the control is
effectively off. Care should be taken to set the
Reverb return master control to a middle position or
above, before adjusting levels from the individual
channels. When the reverb/auxiliary mix is set,
overall levels of reverb can be adjusted at the master
control.
E. BAL
- The balance control features a notched
position indicator and adjusts the perceived
“position” of the mono signal from the input within
the stereo “panorama” created by the two speaker
systems. Full Left or Right rotation of this control
sends the signal to the that channel only, with no
signal sent to the other. Intermediate settings allow
3/4 - 1/4 ratios and so on.
STEREO CONTROL FUNCTIONS
EQ HI
EQ LOW
REV/AUX
BAL
LEVEL
STEREO
A
B
C
D
E
