background image

A PRODUCT OF

FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA, U.S.A.

Fender

®

 is a registered trademark of FMIC.

Copyright © 2022 FMIC. All rights reserved. 

PN 7724434000 REV B

IMPORTANT SAFETY INSTRUCTIONS

•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC  
    power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
•WARNING: The unit must only be connected to a safety agency certified, regulated,  
    power source (adapter), approved for use and compliant with applicable local and  
    national regulatory safety requirements.
•Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth  
    for cleaning and then wait until the unit is completely dry before reconnecting it to power.
•Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable  
    of producing very high sound pressure levels which may cause temporary or permanent  
    hearing damage. Use care when setting and adjusting volume levels during use.

ADDITIONAL LANGUAGES

Manual available in additional languages at

www.fender.com/support

 Product specifications subject to change without notice

SPECIFICATIONS

IMPEDANCES

POWER SUPPLY

POWER REQUIREMENTS

DIMENSIONS

WEIGHT

Input: 450kΩ 

Output: 5kΩ (max)

9VDC regulated adapter, 
5.5 x 2.1 mm barrel connector, center negative

80

mA @ 9VDC

2.44” x 4.4” x 2.2” (62mm x 111.8mm x 55.9mm)
0.55 lbs (0.25kg)

Summary of Contents for HAMMERTONE OVERDRIVE










Reviews: