4
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
SERVICE NOTES
INPUT PANEL
removal is required for fuse
replacement and is accomplished by following
these steps:
1.
Remove the 4 screws from the input panel cor-
ners.
2.
Pull the panel out, then up.
3.
Use a small flathead screwdriver to remove the
blown lamp, which is visible through a cutout in
the circuit board.
4.
Remove the spare lamp stowed on the side of
the circuit board and install it where the blown
lamp was removed.
5.
Install the input jack plate in the reverse of re-
moval.
PCB EXCHANGE POLICY
Parts marked with a single asterisk (
*
) in the Part
Lists are not field replaceable. If a failure due to
one of these components is detected, please con-
tact the Fender® dealer Customer Service
Department to order the complete PCB Assembly.
