13
Indicating statuses are as follows:
RED
YELLOW
YELLOW
GREEN
GREEN
YELLOW
YELLOW
GREEN
GREEN
YELLOW
GREEN
GREEN
GREEN
GREEN
GREEN
RED
RED
RED
RED
RED
YELLOW
RED
RED
YELLOW
YELLOW
RED
RED
YELLOW
YELLOW
GREEN
RED
RED
YELLOW
YELLOW
GREEN
GREEN
•
voltage
< 3 kV
- 1
×
RED
•
voltage
3–5 kV
- 2
×
RED
•
voltage
5–6 kV
- 1
×
YELLOW
•
voltage
6–7 kV
- 2
×
YELLOW
•
voltage
7–8 kV
- 1
×
GREEN
•
voltage
> 8 kV
- 2
×
GREEN
LED
BARGRAPH INDICATOR
RED
RED
YELLOW
YELLOW
GREEN
GREEN
10. SAFETY GUIDELINES
Install and operate the electric fence systems in such a way that they do not pose the risk of
electric shock to humans, animals or disturb the environment.
Avoid using the electric fence systems that could trap animals or people.
One electric fence system must not be powered by two or more energizers or by independent
power supply devices designated for electric fence systems of the same equipment.
When operating two or more different electric fence systems and if they are powered by
different energizers, the minimum distance between the electric fences must be 2,5 m. Use
electrically non-conductive material if this distance is required to be smaller.
Do not use barbed or razor wire or any other types of sharp-edged wire to install the electric
fence system.
Non-conductive additional fencing in which barbed or razor wire is used must be at least
150 mm from the electric fence system wire and must be earthed at regular intervals.
All electric fence system sections installed along the public roads must be marked with
warning signs attached to poles or fences at regular intervals and visible from the road.
