1. Cut the plastic Dual Lock into 2” lengths.
2. The surface must be cleaned with a mild detergent to
assure proper application of Dual Lock strips.
3. Apply cut Dual Lock to all Dual Lock sewn to the mo-
tor cover.
4. Arrange the motor cover to the tractor. Peel the back-
ing from the Dual Lock and apply to the tractor. Re-
peat this procedure for all Dual Lock
DUAL LOCK®
is a registered trademark of 3M Co.
IMPORTANT
CLOTH STRAPS ARE NOT TO BE ATTACHED TO ANY
MOVING, ROTATING, OR HEAT GENERATING POINTS
OF TRACTOR. ANY EXCESS CLOTH STRAP IS TO BE
CUT OFF.
1. Thread cloth strap through grommets at bottom of
motor cover and tie.
2. Route cloth straps to other side or to a point on tractor
and tie.
TIE STRAPS
1. Attach left and right window frames using tow (2) #10
x 1/2” bolts and nuts.
2. Slide glass in channel of windshield frame.
3. Attach flat strip and angle strip to windshield frame
using two (2) #10 x 1/2” bolts and nuts in second
holes only.
4.
TIGHTEN BOLTS
.
WINDSHIELD ASSEMBLY
Summary of Contents for WEATHERBRAKE 2175
Page 8: ...NOTES...
