1. Remove nut from yoke and door post and attach as-
sembled windshield.
2. Attach assembled windshield to outside of yoke with
nut removed and 1/4” x 1” bolt and nut to other side of
windshield
3. Tighten all bolts.
WINDSHIELD ATTACHMENT
B
A
1. Attach left and right window frames using two (2) #10
x 1/2” bolts and nuts.
2. Slide glass into the channel of the windshield.
3. Attach flat strip and angle strip to the windshield using
two (2) #10 x 1/2” bolts and nuts.
4. Tighten
Bolts.
WINDSHIELD ASSEMBLY
1. Locate holes in door post and cut holes in fabric.
2. Hold door (A) to door post and bottom of windshield.
3. Mark location of holes in door post to door.
4. Cut 5/8” slots next to wire frame of door and attach to
door posts using four #10 x 3/4” bolts, F1 clips and
nuts.
5. Tie door flap (B) to motor cover
6. Tighten
bolts.
DOOR
Summary of Contents for B7410
Page 7: ...NOTES...
