Fema S Series, User Manual, Page: 6 / 20

FEMA ELECTRÓNICA . Series S . S40-T
6
The instrument has two menus accessible to the user :
‘
Configuration menu
’ (key SQ) (
<
)
‘
Fast access
’ menu (key UP) (
5
)
Configuration menu
The ‘ configuration menu ’ modifies the configuration parameters to
adapt the instrument to the application needs. To access the ‘ con-
figuration menu ’ press for 1 second the SQ (
<
) key. This access can
be blocked by activating the ‘ Password ’ (‘ PASS ’) function. While
operating the ‘ configuration menu ’, the alarm status is ‘hold’ to the
status they had before accessing the menu, and the output and con -
trol modules remain in ‘ error ’ state. When leaving the ‘ configuration
menu ’, the instrument applies a system reset, followed by a brief
disconnection of the alarms and the output and control modules.
Functionality is then recovered.
For a detailed explanation on the ‘
configuration menu
’ see section
1.11
, and for a full view of the ‘
configuration menu
’ structure see
section
1.12
.
‘ Fast access ’ menu
The ‘
fast access
’ menu is an operator configurable menu, providing
fast and direct access to the most usual functions of the instrument
with a single key pad stroke. Press key UP (
5
) to access this menu.
See section
1.11.5
for a list of functions eligible for ‘
fast access
’ in
this instrument. The ‘ Password ’ (‘ PASS ’) function does not block ac -
cess to this menu. Accessing and modifying parameters in the ‘
fast
access
’ menu does not interfere with the normal functionality of the
instrument, and it does not generate any system reset when validat -
ing the changes.
Front key pad description
Key SQ (
<
) - press the SQ (
<
) key for 1 second to access the ‘
con-
figuration menu
’. Inside the menu, the SQ (
<
) key functions as a
‘ENTER’ key. It selects and accesses the menu option currently dis -
played. At menus with numerical value entries, it validates the num -
ber displayed.
Key UP (
5
) - the UP (
5
) key gives access to the ‘fast access’ menu.
Inside the menus, it moves vertically through the different menu op -
tions. At menus with numerical value entries, it modifies the digit
selected by increasing its value to 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
Key LE (
3
) - inside the menus, the LE (
3
) key functions as the ‘
ES -
CAPE
’ key. It leaves the selected menu, and eventually, will leave the
whole menu. When leaving the ‘
configuration menu
’ with the LE (
3
)
key, the changed parameters are activated. At menus with numeri -
cal value entries, the LE (
3
) key allows to select the active digit. To
modify the value of the selected digit use the UP (
5
) key.
Menu ‘rollback’
After 30 seconds without interaction from the operator, the instru -
ment will rollback and leave the ‘
configuration menu
’ or the ‘
fast ac-
cess
’ menu. All changes will be discarded.
1.10 How to operate the menus
Input
Example of operation inside the
‘
configuration menu
’.
1. The SQ (
<
) key enters into the
‘configuration menu’.
2. The SQ (
<
) key enters into the
‘ InP ’ option menu.
3. The UP (
5
) key moves through
the menu options.
4. The SQ (
<
) key selects the
desired range and returns to the
‘ InP ’ menu.
5. The LE (
3
) key leaves the ac -
tual menu level and moves to the
previous menu level.
6. The LE (
3
) key leaves the ‘con -
figuration menu’. Changes are ap -
plied and saved at this moment.
(2)
(3)
(3)
(3)
(3)
(3)
(4)
(4)
(4)
(4)
(5)
(5)
(5)
(5)
(3)
(3)
(6)
(6)
(1)