Fema M40 Series, User Manual, Page: 7 / 10

User’s Manual M40-P
Peak & Hold Time (Sec.)
Configuration Menu
Tools
Option1
Configuration for Option1
Option2
Configuration for Option2
Advanced
display
(Segment
linearization)
Password
Version
Points
Enter signal values (“Input”) and associated display val-
ues (“Display“) for each linearization point. Then activate
“Act” to “On”. In case of error verify the points data.
Select password
Firmware version
Factory Default
Resets to factory de-
fault values
Minimum brightness
Activate
Input0 Display0
Input10 Display10
Reset
Brightness
Maximum brightness
Default brightness
Range and scaling 4/20mA = 0/1000
Decimal point without decimal point
Alarms 1,2,3 and 4
Active Off (not managed)
Type maximum
Setpoint 1000
Hysteresis 0 counts
Delay 0.0 seconds
Setpoint2 Off
Display
Fixed digits Off
Average Off
Steps Off
Left zeros Off
Add zero to the right Off
Memory of maximum -9999
Memory of minimum 9999
Peak & Hold Off
Tools
Segments Off
Password Off
Brightness 3
Note - Selecting an input range (Input) scales to the following values :
4/20 mA = 0/1000 ±20mA = ±1000
0/10 Vdc = 0/1000 ±10 Vdc = ±1000
Default factory configuration
Option3
Configuration for Option3*
(*Option3 available soon)
Datasheet
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com
IT and Instrumentation for industry Amplicon.com