Fema Electronica K K40-A Series, User Manual

Page: 5 / 24

FEMA ELECTRÓNICA . Series K . K40-A
5
Functions included Section
‘Fast access’ yes 1.12.5
‘On Power Up’ yes 1.12.7
‘Field correction’ yes, high and low signals 1.12.2
Alarms double setpoints
activation delays
deactivation delays
hysteresis
inverted relays
locked alarms
1.12.3
Display filters recursive
steps
fixed digits
left zeros
1.12.4
Block of ‘DC’ component yes 1.9
‘Locked alarms’ yes 1.12.8
Memory max. and min. readings 1.12.4
Password configuration block 1.12.10
‘Measure’ yes 1.12.5
‘Peak & Hold’ yes 1.12.4
Display brightness 5 levels 1.12.13
Table 4 - Functions included
1.7 Technical specifications (cont.)
1.8 Mechanical dimensions (mm)
1.9 Coupling ‘AC’ or ‘AC+DC’
The instrument provides and internal jumper to block the DC
component of the signal. By default, the blocking of the DC com -
ponent is disabled. To block the DC component of the signal, ac -
cess the internal of the instrument
(see section 1.15)
and open
jumper JP3.
• ‘AC+DC’ JP3 closed (by default)
• ‘only AC’ JP3 open
• the 1 Aac scale is available only with ‘AC+DC’ coupling
JP3
44
92
Panel
cut-out
16 8 75
96
48