Fema Electronica B Series, User Manual, Page: 16 / 28

FEMA ELECTRÓNICA . SERIES B . Models Bxx-T
16
The output and control options are optional modules that
can be installed at the instrument. Formats B24 and B44
have 2 free slots for output and control options, while for -
mats B26 and B46 have 3 free slots
(see section 1.4)
.
Several of these optional modules have their own configura -
tion menu embedded. The ‘ OPt.1 ’, ‘ OPt.2 ’ and ‘ OPt.3 ’ menu
entries give access to the configuration menu of the option
installed.
See section
2
for a list of available output and control mod -
ules
Option 1
Access to the optional module installed at slot 1
Option 2
Access to the optional module installed at slot 2
Option 3
Access to the optional module installed at slot 3
At the ‘ Brightness ’ (‘ LIGh ’) menu select the intensity level
for the display . Use this function to adapt the brightness to
match other instruments in the vicinity or to the darkness or
clarity of your environment.
Minimum
Brightness
Maximum
Standard
The ‘ Version ’ (‘ VEr ’) menu informs about the firmware ver -
sion installed on the instrument.
Version
The password function blocks access to the configuration
menu. The ‘
fast access
’ menu is not affected by the password
function. This means that the configuration menu can be pass -
word blocked, while some configured functions or parameters
can still be accessible to the operator through the ‘
fast access
’
menu.
To active the ‘ Password ’ function select ‘ on ’ and introduce
the 6 digits code. The code will be requested when trying to
access the ‘configuration menu’ (front key ‘SQ’ (
<
)).
1.13.11 Password configuration
Password
At the ‘ FActory configuration ’ (‘ FAct ’) menu select ‘ yes ’ to
activate the default factory configuration. See section
1.14
for a list of default parameters.
Factory
configuration
1.13.12 Default factory configuration
1.13.13 Firmware version
1.13.14 Brightness configuration
1.13.15 Access to the options configuration menu