Secure brackets with bracket
screws and caps provided.
1.
3.
4.
2.
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
Unscrew and separate the mounting
bracket from the end post.
Mount the mounting brackets into position
(731 mm Centre to Centre).
It is recommended that silicone sealant be used to
seal the fixing brackets.
Fit soap dish onto the
rail from the bottom then
fit both end posts.
Mount the rail onto the
mounting brackets in place.
5.
6.
INSTALLING INTO CONCRETE/BRICK WALL...
Pre-drill holes to 731 Centre - Centre
and fit the wall anchors then follow
the above instruction.
1
2
731mm C-C
731mm C-C
End post
Mounting
bracket
Screw the elbow into the water outlet (wingback). Sealant required on
thread to achieve a water tight seal. Fit flow restrictor to handpiece,
then screw the hose onto the elbow and handpiece and attach the
handpiece to the slider on the rail.
