HOW TO INSTALL
INSTALLING INTO STUD/NOG... (RECOMMENDED)
Flush supply lines.
For Mains Pressure, fit the flow restrictor first
and then screw the rain head onto the arm (fig 3).
Turn on water supply and check for leaks.
1. Ensure the wingback when fitted is parallel and square
to the finished ceiling lining as shown (fig 1).
2. Apply seal thread tape to BSP and thread the vertical
arm into the wingback.
FIG 2.
PARALLEL
Ø30mm
max hole
WINGBACK
90°
FIG 1.
10-20mm
FRONT OF WALL
FIG 3.
3.
4.
5.
www.feltontapware.com.au
PO Box 4191 Burwood East Victoria 3151, Australia
121118KG
For technical assistance please ring: 1800 792 760
Felton Australia Pty Ltd
