Felton Digital SMARTVIEW FD-SVCSMC, User Manual

Page: 15 / 20

15
EXTENDED MENU FEATURES
SWITCHING BETWEEN TEMPERATURE UNITS
The temperature unit function allows you to
switch between Celsius (°C) or Fahrenheit (°F).
1. Press menu button to enter extended menu
2. Scroll to TEMPERATURE UNIT icon
3. Press menu to change unit
4. Temperature unit will display to confirm settings
THERMAL DISINFECTION
This feature flushes out the pipes at the
hottest temperature your system will allow.
this will clean through any limescale and clear
any potential bacteria. The complete flush will
automatically stop after 5 minutes.
Thermal disinfection can be stopped at any
time by pressing the control wheel.
1. Press menu button to enter extended menu
2. Scroll to THERMAL DISINFECTION icon
3. Press menu to initiate disinfection
4. Red light will flash for 5 minutes with hot water flushing with a status bar
on the display. Afterwards cold water will flush through the system.
5. The icon will display a tick to confirm the disinfection is complete
Note: If your thermal disinfection indicates a cross symbol at the end of the disinfection, your system has
not provided hot water greater than 55ºC. This can be ignored as it does not affect the function of the
thermal disinfection process.
1. Press menu button to enter extended menu
2. Scroll to FACTORY SETTING icon
3. Press menu to initiate factory restore setting
4. Factory setting icon will display to confirm
restore setting
FACTORY SETTING
This resets all of the parameters
back to the factory settings.