CABLE LINER
INSTALLATION GUIDE
5
4
ROUTING
ROUTING
FRONT BRAKE
It is best to route the cable from the bottom up. Begin by
inserting the end of the cable into the lower hole, feeding
the cable through the fork blade toward the upper hole.
IMPORTANT
To allow for full range of
handlebar movement, it’s
important to always route
the front brake cable on the
outside of the the cables
exiting the ports found on
the headtube. (as shown)
Start by locating the port found on the driveside junction between the seat and the
chain stay. Thread the cable liner through the port until it exits the port found on the
bottom bracket.
Once the cable liner has been properly threaded through the chain stay, you can
now route the derailleur cable through the liner using a typical cable installation
procedure.
Summary of Contents for FR SERIES
Page 1: ...FR SERIES TECHNICAL MANUAL...
Page 7: ......
