background image

420
420 CC
420 HS

Paper shredder

4

1.209.999.100

Edition 08/99

USA

1. Important Safety Instructions

  1. Read all instructions before use.
  2. Save these instructions for later use.
  3. Follow all warnings and instructions marked on

the product.

  4. Unplug this product from the wall outlet before

cleaning. Cleanwith a damp cloth using a mild
soap and water solution. (Do not use abrasives
or petroleum based cleaners.)

  5. Place this product as close as possible to

power source for quick and easy unplugging.

  6. Do not use this product near water.
  7. This product should never be placed near or

over a radiator or heat source.

  8. Operate from the type power source indicated

on the marking label. If you are not sure of the
type of power available, consult your dealer or
local electricity board.

  9. Do not allow anything to rest on the power cord.

Do not place this product where people may
walk on the cord.

10. If an extension cord is used with this product,

make sure that the total of the ampere ratings
on the products plugged into the extension cord
do not exceed the extension cord ampere
rating. Also, make sure that the total of all
products plugged into the wall outlet does not
exceed 15 amps.

11. Do not attempt to service this product yourself,

as opening or removing covers may expose
you to dangerous live parts or other risks.

12. Unplug this product and refer servicing to

qualified personnel under the following
conditions:

A)

When the power cord or plug is damaged or
frayed.

B)

If liquid has been spilled on the product.

C)

If the product has been exposed to rain.

D)

If the product does not operate normally when
the operating instructions are followed.

E)

If the product has been dropped or the casing
has been damaged.

13. Keep out of the reach of children.
14. This shredder should be operated only with an

operator in attendance.

2. Parts Identification

1. LED display

5. Caution label

2. Rocker switch

6. Cabinet

3. Cover

7. Cabinet access door

4. Serial label

8. Paper feed opening

 7

 8

 5

 6

Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA

Model:
Serial #:
Voltage:

Motor:

Current:

Manufactured:

R

R

R

 4

 2

 3

 1

420
420 CC
420 HS

Summary of Contents for POWERSHRED 420CC









Reviews: