CLEANING AUTO-START INFRARED SENSORS
PRODUCT MAINTENANCE
Paper detection sensors are designed for maintenance free operation. However, on rare occasions, the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present.
/PUFUXPQBQFSEFUFDUJPOTFOTPSTBSFMPDBUFEJOUIFDFOUFSPGUIFQBQFSFOUSZ
.
TO CLEAN THE SENSORS
5VSOPGGBOEVOQMVH
shredder
Locate Auto-start
infrared sensor
6TJOHDPUUPOTXBCXJQF
away any contamination
from the paper sensors
Dip cotton swab in
rubbing alcohol
ENGLISH
Model 225Mi
"MMNJDSPDVUTISFEEFSTSFRVJSFPJMGPSQFBLQFSGPSNBODF*GOPUPJMFEBNBDIJOFNBZFYQFSJFODFEJNJOJTIFETIFFUDBQBDJUZJOUSVTJWF
OPJTFXIFOTISFEEJOHBOEDPVMEVMUJNBUFMZTUPQSVOOJOH5PBWPJEUIFTFQSPCMFNTXFSFDPNNFOEZPVPJMZPVSTISFEEFSFBDIUJNFZPV
empty your waste bin.
OILING SHREDDER
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
PREVENTIVE MAINTENANCE & ACCESSORIES
TROUBLESHOOTING
4
Press and hold forward
( ) 2-3 seconds
AUTO
2
3
AUTO
1
225Mi
16
225Mi
16
2
4
225Mi
16
1
#JO'VMM*OEJDBUPS8IFOJMMVNJOBUFEUIFTISFEEFSXBTUFCJOJTGVMMBOEOFFETUPCFFNQUJFE6TF'FMMPXFTXBTUFCBH
%PPS0QFO*OEJDBUPS5IFTISFEEFSXJMMOPUSVOJGUIFDBCJOFUEPPSJTPQFO8IFOJMMVNJOBUFEDMPTFUIFEPPSUPSFTVNFTISFEEJOH
3FNPWF1BQFS*OEJDBUPS8IFOJMMVNJOBUFEQSFTTSFWFSTF
BOESFNPWFQBQFS3FEVDFQBQFSRVBOUJUZUPBOBDDFQUBCMFBNPVOUBOESFGFFEJOUPQBQFSFOUSZ
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds.
