A
B
C
2
Equipment Parts
1. Punching Handle (PB 2300)
2. Punching Switch (PB 2500)
3. Punching
Area
4. Adjustable
Margin
Guide
5. On/Off Switch (PB 2500)
6. Sheet Supporter \ Machine Cover
7. Comb Guide Selector
8. Machine
Cover
9. Binding
Lever
10. Binding Rakes
11. Paper Clippings Tray
Assembly
Assembly (PB 2300, only)
1. Attach the punching handle to the right side of the
machine by first aligning handle with square shaft on
machine. Press firmly.
NOTE: To operate correctly, the punching handle
should be positioned as illustrated below.
Once handle is fully attached, secure by inserting the
screw supplied.
Using the Binding
Machine
A unique feature of Fellowes PB 2300 \ 2500 models allows
simultaneous punching and binding for larger projects.
Simply punch sheets and add to binding comb instantly.
Prevents handling document contents twice and saves time.
Adjusting the Punch
Holes should always be centered between the top and
bottom of paper edge. To center hole, set the adjustable
margin guide. For best results, always first use several
“practice sheets” to set up margin guide.
Punching Holes
PB 2300
1. When inserting paper into punching area, be sure all
sheets are flush with margin guide.
NOTE: a maximum 25 sheets can be punched at a time
2. Lower the handle to punch holes in paper.
3. Return punching handle to its original starting position
and remove sheets.
4. Repeat until all sheets and covers have been punched.
PB 2500
1. Turn machine on by depressing on/off switch.
2. Insert paper into punching area, making sure all sheets
are flush with margin guide.
NOTE: a maximum 12 sheets can be punched at a time
3. Depress punching switch and release.
4. Remove sheets from punching area.
5. Repeat until all sheets and covers have been punched.
®
3
6
1
10
7
8
4
2
9
11
5