![background image](http://html.mh-extra.com/html/fellowes/mars-a3/mars-a3_instructions-manual_550516003.webp)
TROUBLESHOOTING
WARRANTY
Fellowes warrants all parts of the laminator to be free of defects in mate-
rial and workmanship for 1 year from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your
sole and exclusive remedy will be repair or replacement, at Fellowes’ option
and expense, of the defective part. This warranty does not apply in cases of
abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUD-
ING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT
SHALL FELLOWES BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty gives you specific
legal rights. You may have other legal rights that vary from this warranty. The
duration, terms and conditions of this warranty are valid world-wide, except
where different limitations, restrictions or conditions may be required by local
law. For more details or to obtain services under this warranty, please contact
us or your dealer.
Problem
Ready Light does not go on after
extended time.
Pouch did not completely adhere
to item.
Jamming
Cause
Laminator is in a hot, humid area.
Laminated item may be too thick.
Pouch was not used.
Pouch was not centered or straight when fed
through Pouch/Document Entry.
Solution
Move laminator to a cool dry area.
Pass through laminator a second time.
Always put item in a pouch.
Align sealed edge with Pouch/Document Entry.
Use guide to center.
Need Help?
Please call our experts at Customer
Service. You’ll find the numbers for
your nearest Service Centre on the
cover of this booklet.
LAMINATION STEPS
• Plug laminator into
power outlet.
• Position lamina
-
tor so you have
enough space to
allow items to pass
freely through the
machine.
Slide power button to
right and wait for green
Ready Light.
Place pouch, sealed edge
first, into laminator entry.
Keep pouch straight and
use the edge guide to
center it.
To prevent jamming,
immediately remove
laminated item from back
of machine. Let item cool
on flat surface for several
seconds.
Before switching off lami-
nator, feed empty cleaning
& support sheet through
machine to clean unit.
Use Fellowes
®
brand pouches
for best
results. Select
correct pouch
size for lami-
nated item.
Place item inside pouch
against the sealed edge.
To prevent jamming, use
a carrier when item is
smaller than the pouch.
1
3
BEFORE YOU LAMINATE
2
3
4
5