ENGLISH
Models 4850C/4850S
Will shred:
Paper, credit cards, CD/DVDs, staples, paper clips and junk mail
Will not shred:
Adhesive labels, transparencies, newspaper, cardboard, laminates, file
folders, X-rays or plastic other than noted above
Paper shred size:
Strip-Cut ........................................................................................... 7/32 in. (6mm)
Cross-Cut ........................................................ 5/32 in. x 1-9/16 in. (4mm x 40mm)
Maximum:
Paper entry width .......................................................................... 15-3/4”(400mm)
8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 8Amps; heavier paper, humidity or other than
rated voltage may reduce capacity.
* In order to perform at capacity, shredder must be plugged into a dedicated 15Amp,
120V outlet.
CAPABILITIES
KEY
15
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder. Do not place
near or over heat source or water.
• Do not operate the machine without the safety shield closed (A)
• This shredder has a Disconnect Power Switch in the cabinet door. The door must
be fully closed to operate shredder. In case of emergency, open cabinet door. This
action will stop shredding immediately.
• Avoid touching exposed cutting blades under shredder head.
• Do not put foreign objects in paper entry.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with
this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
15
15
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
BASIC SHREDDING OPERATION
BASIC SET UP
Ensure access to a
dedicated 15Amp,
120V outlet
Open the door
R
R
R
R
1
2
3
Place cutter head into
top of cabinet, use 2
people
Plug in and make
sure door is closed
Press ( ) ON to
activate
When finished
shredding set to
( ) OFF
Feed paper straight
into paper entry and
release
Do nothing and shredder
will automatically shut
off after 30 minutes of
inactivity
Make sure safety flap
is securely in place
SHREDDER SET-UP
TO SHRED
R
R
R
R
R
R
R
or
4
5
R
R
1
R
R
R
R
R
R
R
2
R
R
A.
B.
G.
H.
F.
C.
D.
E.
R
R
4
R
R
3
H. Control Panel and LEDs
1. ON/OFF (blue)
R
2. Reverse (red)
3. Bin full (yellow)
4. Door open (red)
5. Safety Shield Open (red)
A. Safety Shield
B. Paper entry
C. Disconnect switch (open door)
D. Door
E. Basket (inside)
F. Casters
G. See safety instructions
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
