NOTE:
Follow these instructions for
best results.
• Place unit at least 2 feet from the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Remove the front panel by grasping the
bottom outside edges and gently pulling
toward you.
3. Pull out the filter packages and remove
sealed plastic wrap.
4. Return the filters to the unit, inserting the
True HEPA first with the arrow pointing
toward the back of of the unit and then
insert the carbon filter. (See page 10)
5. Replace the front panel by hooking the
front panel on the top of the unit. Swing
panel in by pushing gently until the panel
snaps into place.
6. Plug in the power cord to a wall outlet or
a surge protector.
7. Press POWER button until short “beep”
is heard.
AIR PURIFIER SET-UP
For the first 4 minutes after turning the
unit on, the indicators will flash while the
unit measures air quality.
6
AP-230-300PH_ 869215_3L_RevB_061412.indd 6
6/18/12 4:48 PM
