10
ROTISSERIE SKEWER INSTALLATION
After putting the food on the rotisserie skewer , firstly, connection part 1
of the rotisserie skewer should be aimed at the shaft of the rotary motor.
Then the shaft is put into the hole of the connection part. Secondly, put
the supporting part 2 of the rotisserie skewer to the upside of the rotisserie
skewer which is on the profile of the cavity. There is a semicircular position
in the middle of the supporting part, the food can be put on it.
Supporting Part 2
Tighten completely
the fixing screws
Supporting Part 1
Shaft of the Rotary Motor
to support
the
rotisserie
skewer
Warning:
using the rotisserie skewer under microwave is forbidden.
