Press and hold the button on your Boat Unit.
Release the button when the Boat Unit starts
flashing blue and gives a sound signal indicating
Pairing Mode.
Immediately after releasing the button on the
Boat Unit, press and hold the button on your MOB
Unit. Keep the MOB Unit within 1 meter range
from the Boat Unit.
The Boat Unit will give a sound signal and blink
green to indicate that the units was paired
successfully. You can now release the button on
your MOB Unit.
Pairing
After proper installation, pair the MOB Unit and the Boat Unit, as
described below:
Press and release the button on your MOB Unit to
connect.
The Boat Unit will give a sound signal and blink
green to indicate a successful connection.
Connecting
After successful pairing, connect the MOB Unit to the Boat Unit as
shown below:
Do not detach the MOB Unit from the body and
place it at the helm or any other place in the boat
while driving or the engine is running. The MOB
Unit must be attached to your body at all times, to
ensure engine stop, if you falls over board!
Start
NOTICE
You can now start your engine.
Every 10 seconds the Boat Unit will flash green to
indicate active connection.
12
13
Summary of Contents for WiMEA
