Touchscreen installation
FELIX
Pro
18 November 2019
Page
17
1.
After unboxing/moving printer.
2.
When you see first layer printed lines are deviating from width across the print surface.
We already leveled the bed in t
he previous step so you don’t need to do this, we do need to calibrate the Z and the XY.
XY and Z Nozzle calibration
: These calibrations align the printheads with respect to each other to get an optimal dual head print.
When to do this?
1.
After exchanging a hot-end
2.
When you clearly see that during dual head printing the nozzles are not aligned in x,y or height.
After that you’re good to go!
