Maintenance and Cleaning
Automatic Defrosting of the Refrigerator
There is no need to defrost the refrigerator, because the ice depositing on the inner
back wall is defrosted automatically.
Ice is depositing on the inner back wall during the compressor operation; later on,
when the compressor is not operating, ice is defrosting and water drops, collects
and drains through the outlet in the inner back wall into the drain pan situated
above the compressor where it evaporates.
Cleaning the Appliance
Disconnect the power supply
before cleaning the appliance. Do not use coarse or
Aggressive cleaning agents as you can damage the surface.
•
Clean the
exterior
with water and detergent. Varnished surfaces are
cleaned with soft cloth and an alcohol based cleaning agent (for
example glass cleaners). You may also use alcohol (ethanol or
isopropyl alcohol). The application of abrasive and especially
aggressive cleaners, such as stainless steel cleaners, is not appropriate
for the cleaning of plastic and coated parts.
•
Remove the detachable accessories in the interior of the appliance and
clean it with water and liquid detergent. Plastic parts
cannot
be
washed in a washing machine.
•
Wash the interior of the appliance with lukewarm water, in which you
add one or two spoonfuls of vinegar.
•
Every now and then wipe the condenser on the rear wall. Use a soft
non-metal brush or vacuum cleaner.
•
Do not forget to clean the defrost water receptacle above the
refrigerators compressor (do not remove the receptacle). After
cleaning, connect the appliance to the power supply and reload the
packages.
Switch Off the Appliance When Not in Use
If you do not intend to use the appliance for an extensive period of time set the
thermostat knob to the 0 (off) position and disconnect the power supply. Then
take out the foods and clean the appliance. Leave the door slightly open.
Instructions for Use
