Quick Start Guide FELIX FOODprinter
Page
1
1.
Safety
General safety
-
Keep children under the age of 14 out of reach of the printer
-
FELIXprinters are only suitable for professional use.
Considerations when in operation.
-
Don’t
leave the printer unattended, before making sure the
first layer is printed properly
-
Don’t
lean on the printer.
-
Be careful with long hair and wide clothes.
-
Don’t
transport the printer while printing.
-
Make sure all moving parts can move without any
obstructions.
-
Don’t
remove any objects from the hot plate while printing.
-
Caution with any moving parts that move in the X, Y and Z
direction. Moving parts can have a pinching hazard.
Electronic safety
-
Only use the power supplies and cables supplied by
FELIXprinters. Always turn off and unplug the printer before
performing maintenance or modifications.
-
The power supply meets all CE mark regulations and is
protected against short-circuit, overload, over voltage and
over temperature.
Printer placement
-
Place the FELIXprinter on a stable table/desk or something
with a similar height.
-
Place the printer on a height where children cannot reach it.
Use the FELIXprinter in a clean environment at room
temperature.
Caution with harmful print media
-
Some media can be toxic or harmful when eaten.
FELIXprinters is in no way responsible for harm by
poisoning when printing objects with poisonous media.
The responsibility for eating printed media rests entirely
with the end-user/consumer.
Caution with heater elements
-
There is a potential risk of burn, as the print head and
bed addon module can reach temperatures of up to
50
°
C and the standard heated bed of up to 100
°
C.
-
Always let the printer cool down for at least 5 minutes
before doing maintenance or modifications.
