Assembly Manual
16 December 2021
14
FELIX 3.2
Y-axis
63
Lock the set screw by fixing the nut
onto the thumb screw.
While fixing the nut keep set screw in
place with allen key.
64
(2x) Thumb screw
(2x) Spring
(1x) Build platform assembly
Tools:
65
(2x) Cable tie
Tools:
66
(1x) Bolt M4 x 12
(1x) Spring
Tools:
67
(1x) Cable ties for mounting
cables on z bracket.
Tools:
68
(1x) Cable ties for mounting
cables on z-bracket.
Tools:
-
!! Give the cable enough slack and tighten the cable tie !!
2x
!! Repeat for front and rear thumbscrew !!
!! Tighten this bolt again at the end of the thread !!
End to end 25cm
3
!! Give the cable enough slack and tighten
the cable ties.!
7
2
