Firmware update
FELIX
Pro L/XL
13 May 2019
Page
13
We already leveled the bed in the previous step so you don
’
t need to do this, we do need to calibrate the Z and the XY.
XY and Z Nozzle calibration
: These calibrations align the printheads with respect to each other to get an optimal dual head print.
When to do this?
1.
After exchanging a hot-end
2.
When you clearly see that during dual head printing the nozzles are not aligned in x,y or height.
After that you
’
re good to go!
