Felisatti F91199, Manual

Page: 15 / 21

15
GENERAL SAFETY RULES
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions
can cause you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never modify the plug in any way.
Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
5. Do not expose power tools to rain or wet conditions.
Water entering a power tool
will increase the risk of electric shock.
6. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
7. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
8. Stay alert, watch what you are doing and use
common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
9. Use safety equipment.
Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
10. Avoid accidental starting.
Ensure the switch is in the off-position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that
have the switch on invites accidents.
11. Remove any adjusting key or wrench before
turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
12. Do not overreach.
Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
13. Dress properly.
Do not wear loose clothing or jewellery. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
14. If devices are provided for the connection of dust
extraction and collection
facilities, ensure these are connected and properly used. Use of these devices can
reduce dust-related hazards.