Felisatti F90010, Manual, Page: 17 / 21

Functional Instruction

How to start
1. Drill is equipped with gear box and uses electric commutated motor as a drive. All the parts of drill
are placed in a separable plastic housing that consists of two halves. A keyless drill Chuck is
attached at the end of the output spindle.
2. Power on drill by pressing (1)switch trigger. The switch allows to lock the switch at “ON” position by
pressing the lock button once. The direction of rotation can be adjusted by pushing the . By
changing the pressing force on the button to get smooth variation of rotation speed from minimum
to maximum.
For F90110 : Use ( 5) s peed selecting button to switch between 2 gear configurations .
1 st Gear - for driving screws and drilling big holes,
2 nd Gear – for drilling small holes.

Torque settings
Torque settings can be adjusted using the torque cup.
1.
for driving screws:
1 –small torque – for working with small screws or on soft materials.
20 –big torques – for working with big screws or on hard materials.
When the tool is gaining the specified torque, the safety ratchet of overload works to keep the torque.
Always select proper torque that is suitable for your work.
2. for drilling
Rotate the torque cup to the drilling position.
Switch has a braking function. When release the switch trigger, the motor will be braked sharply so that
the rotation also stops. That’s convenient when driving screws on soft materials.
While drilling, if bit is blocked due to overload, release the switch trigger immediately and remove the bit. If
the bit is clamped in a power-on machine for a long time, the motor may overheat and be damaged.
17