felfil evo, Manual, Page: 33 / 42

Complete Kit Manual
Complete Kit Manual
33
In order to obtain the best quality filament, Felfil Evo is designed to be placed on a common
and stable table and to extrude on the floor.
The height of extrusion is called drop, and tipically is about 80cm.
Moreover, with some materials,it will be useful to reduce or to increase the drop in order to
obtain more constant diameter of the filament; typically PLA need this treatment.
So, if your filament is quite inconstant or get stretched too much, try to reduce or increase
this value.
drop