31
32
Hawk’s Nest - User Guide
05 - Installation
Double check you have read our roof rack & vehicle requirements on page 10. Your vehicle &
roof rack setup must meet all requirements before installation. Feel free to
contact us
with any
questions.
☐
Prepare your mounting hardware brackets by sticking the Rubber Mounting bracket protector
to each bracket. The new rubber side of the mounting bracket should face upward against the
underside of your roof racks when mounting.
☐
Choose which length M8 Bolts will best suit your roof rack bar profile. There is 50mm (generally
used for most roof rack profiles) & 65mm (for heavy duty square bar profiles) to choose from.
☐
With a buddy or two helping, carefully lift the Hawk’s Nest onto your roof rack. The hinge side of
the tent should be facing the front of your vehicle.
☐
Position the Hawk’s Nest centrally both front-to-back & side-to-side on your roof racks.
Note: If your vehicle has an upwards opening boot, open the boot and position the Hawk’s Nest so it
does not contact your boot door when open.
Let’s get your new rooftop home on the roof!
