CASAMBI APP
2. Initialize / configure switches
By pressing any key of the FELA SWITCH, the automatic detec-
tion in the app is triggered.
By tapping on „Add to ...“ the desired network can be selected.
1b. Inserting the battery
(mobile battery switch)
Open the battery compartment carefully by turning it coun-
terclockwise. Insert a button cell type CR2430 with the positive
terminal pointing towards the battery cover. Turn battery cover
clockwise to close. It may only be closed with the battery inser-
ted.
1a. Mounting the switch
(stationary 230V)
Connect the flush-mounted insert (power supply unit) and
then mount it in the correct position in the existing installation
(socket). Insert the glass front panel, it must be clicked into place
with an audible snap.
1a. Installing the switch
(stationary 230V)
The power section must be connected as shown (L/N). For this
purpose, the connecting cables must be skinned approx. 6 - 8
mm. Then adjust the power section appropriately and fix it using
the mounting screws of the flush-mounted insert.
