background image

DECLARATION OF CONFORMITY

FELA GmbH hereby declares that the FELA SWITCH CASAMBI as the sta-

tionary 230 Volt wall switch and mobile battery switch comply with the 

2014/53/EU directive.

FELA GmbH

Sturmbühlstraße 180 – 184

D-78054 Villingen-Schwenningen

Phone: +49 7720 3902-0 | www.fela.de

OPERATION AND

INSTALLATION MANUAL

FELA SWITCH CASAMBI 

stationary 230 Volt / mobile battery switch

ENVIRONMENTAL PROTECTION AND DISPOSAL

Old devices must not be disposed of with household waste. According 

to EU regulations, electronic devices must be handed in at a designated 

collection point at the end of their service life.

Use the country-specific return and collection systems for the disposal of 

old electrical or electronic equipment and batteries.

Dispose of packaging materials in an environmentally friendly manner.

SAFETY INSTRUCTIONS

Danger of electric shock. Before working on the device, disconnect all as-

sociated circuit breakers 

(stationary 230 V wall switch).

 

Danger of explosion if incorrect batteries are used. Keep batteries out of 

the reach of children. Swallowing a battery can have life-threatening con-

sequences

 (mobile battery version). 

 

Protect the system from direct sunlight to avoid high temperatures. Avoid 

using the switch in strongly heated rooms and, if possible, keep it away 

from heat sources. 

 

Keep the switch away from rooms with high humidity.

 

If the glass is damaged, e.g. due to a fall, the switch must not be used 

again. There is a risk of injury. Damage to the glass can lead to false trig-

gering.

 

There is a risk of burns if the glass surface is too hot. Let the system cool 

down before using the device again.

 

TECHNICAL SPECIFICATIONS

 

Stationary  

230 Volt

Mobile  

battery switch

Operating voltage

220 – 240 V

3,3 V button 

cell (CR2430)

Frequency

50 Hz

Power consumption

< 5 mA

< 50 µA

Operating temperature

10 to 30° C

Storage temperature

-20 °C to 60 °C

Signal transmission

Bluetooth 4.0 

Frequency

2,4 GHz

Max. transmission power

2,51 mW

Bluetooth range

up to 30 m

Surface

Glass in black, white, silver-grey

Dimension (L x W x H)

86 x 86 x 43,3 

mm (surface 

11,6 mm)

89 x 89 x 9,8 

mm

Wallpaper compensation

max. 1 mm

-

You will find comprehensive operating and installation instructions on our 

website at www.fela.de/downloads-2

Summary of Contents for SWITCH CASAMBI









Reviews: