Remove the tail cap, open the batteries cover, and install the batteries correctly.
Align the handle positioning screw with the corresponding positioning holes
under the pan axis machine and then tighten the fixing ring.
Positioning screw
Positioning hole
Stylus
When installing or removing handle, please keep gimbal in vertical position.
Do not move left or right, to prevent the stylus from damage.
18650 Li-ion Battery x4
1
3
2
!
!
The four positioning screws must be aligned with the corresponding positioning holes
and then tighten the fixing ring.
Tight
Loose
Alignment
Alignment
2.3 Battery Installation
2.4 Handle Installation
03
www.feiyu-tech.com
Please properly check the
cathode and anode of
batery before put the battery
on,the gibmal can't be
turned on with wrong
battery mounted.