You need to reconnect the cable after rebooting the gimbal.
19.Q: When connecting Panasonic cameras via the DC2.5 cable, the camera
has no response when trying to switch recording mode.
A
：
The camera uses a mechanical button to switch recording mode, so it is not supported for
digitally control.
20.Q
：
When using the AKF II, it doesn’t keep attaching tight with the lens
when rotating the magic ring to focus.
A:
1) Make sure to install the lens support, and also install the camera fixing bracket on the
top.
2) Make sure the lens is not too tight for the AKF II to carry.
3) Switch to another lens and test if the AKF II is faulty.
21.Q: Can’t power up the gimbal after keyboard firmware update?
A:
After successfully updating, you need to hold the power button for around 10 seconds til
the screen fully light up to power on the gimbal.
22.Q
：
How to connect with Nikon camera?
A:
Nikon cameras are not supported by AK2000s for WiFi connection.
Part of the Nikon cameras could be connected via USB cable (Z6/Z7/D850/D7500).
Summary of Contents for AK2000S
Page 12: ......
